USA India Foodoric and associated companies are chemicals manufacturing companies operated in India USA UAE Europe and other countries around the world. The associates have one or more of certifications like ISO-9001:2008, ISO-14001, ISO-22000:2005, FSSC 22000; OHSAS 18001; Kosher and Halal Certified; HACCP, FSSAI and FDA - GMP approval. Buyers are assured of good quality and CIF wholesale and retail price for supplies of our Sodium Iodide.

Foodoric Home --------- Foodoric Contact

Jumbo Packing Bulk container Open top drum Bags Export supplies air suppliers Export Import Sodium iodide manufacturers

Sodium Iodide Pure & USP BP ACS Reagent Manufacturers Suppliers

Sodium Iodide
Pure & USP BP ACS Reagent
Sodium iodide

Sodium Iodide: CAS Number: 7681-82-5(anhydrous), Molecular Formula: NaI, Molecular Weight: 149.89

Sodium Iodide USP
NaI -- 149.89 -- [7681-82-5].

Sodium Iodide contains not less than 99.0 percent and not more than 101.5 percent of NaI, calculated on the anhydrous basis.

Identification: A solution (1 in 20) responds to the tests for Sodium and for Iodide.
Alkalinity: Dissolve 1.0 g in 10 mL of water, and add 0.15 mL of 0.10 N sulfuric acid: no red color is produced by the addition of 1 drop of phenolphthalein TS.
Water: not more than 2.0%.
Iodate: It meets the requirements of the test for Iodate under Potassium Iodide, 100 mg of Sodium Iodide being used in the control.
Thiosulfate and barium: It meets the requirements of the test for Thiosulfate and barium under Potassium Iodide.
Potassium: A solution of 1.0 g in 2 mL of water yields no precipitate with 1.0 mL of sodium bitartrate TS.
Heavy metals: Dissolve 2.0 g in 25 mL of water: the limit is 0.001%.
Limit of nitrate, nitrite, and ammonia: Add 5 mL of 1 N sodium hydroxide and about 200 mg of aluminum wire to a solution of 1.0 g of Sodium Iodide in 5 mL of water, contained in a test tube of about 40-mL capacity. Insert a pledget of purified cotton in the upper portion of the test tube, and place a piece of moistened red litmus paper over the mouth of the tube. Heat in a steam bath for 15 minutes: no blue coloration of the paper is discernible.


Sodium Iodide BP (Ph Eur monograph 0196)
NaI -- 149.9 -- 7681-82-5

DEFINITION
Content: 99.0 per cent to 100.5 per cent (dried substance).

CHARACTERS
Appearance: White or almost white, crystalline powder or colourless crystals, hygroscopic.
Solubility: Very soluble in water, freely soluble in ethanol (96 per cent).

IDENTIFICATION
A. Solution S (see Tests) gives the reactions of iodides.
B. Solution S gives the reactions of sodium.

TESTS
Solution S: Dissolve 10.0 g in carbon dioxide-free water R prepared from distilled water R and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear (2.2.1) and colourless.
Alkalinity: To 12.5 ml of solution S add 0.1 ml of bromothymol blue solution R1. Not more than 0.7 ml of 0.01 M hydrochloric acid is required to change the colour of the indicator.
Iodates: To 10 ml of solution S add 0.25 ml of iodide-free starch solution R and 0.2 ml of dilute sulphuric acid R and allow to stand protected from light for 2 min. No blue colour develops.
Sulphates: Maximum 150 ppm.
Thiosulphates: To 10 ml of solution S add 0.1 ml of starch solution R and 0.1 ml of 0.005 M iodine. A blue colour is produced.
Iron: Maximum 20 ppm.
Dilute 5 ml of solution S to 10 ml with water R.
Heavy metals: Maximum 10 ppm.
Loss on drying: Maximum 3.0 per cent, determined on 1.00 g by drying in an oven at 105C for 3 h.


Sodium Iodide ACS AR Analytical Reagent Grade Chemical
NaI
Formula Wt 149.89
CAS Number 7681-82-5

REQUIREMENTS
Assay: Minimum 99.5% NaI
pH of a 5% solution: 6.0-9.0 at 25C

MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Chloride and bromide (as Cl): 0.01%
Iodate (IO3): 3 ppm
Nitrogen compounds (as N): 0.002%
Phosphate (PO4): 0.001%
Sulfate (SO4): 0.005%
Barium (Ba): 0.002%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Calcium (Ca): 0.002%
Magnesium (Mg): 0.001%
Potassium (K): 0.01%

Sodium Iodide Manufacturers Suppliers:

Foodoric Group of Cos
India, USA, UAE, Europe

e-mail: info@foodoric.com

Suppliers USA India
Copyright Last 8 December, 2017

Sodium Iodide Suppliers, Exporters, Importers, Manufacturers offering good CIF wholesale and retail prices, quality and online information.

A jackal woke up early in the morning and went in to the plains. He looked at his long shadow in the rising morning sun and said to himself, "I must have a camel for my meal today".

He kept moving around till noon and it was getting hot and the jackal was tired. He was also hungry and thirsty. He looked at his small shadow in the mid-day sun. He murmered, "I was only joking about the camel, a mouse will do".