 | Foodoric and associated companies are chemicals manufacturing companies exporting and supplying Cupric Chloride or Copper II Chloride Pure n USP Grade, operated in India USA UAE Asia Europe and other countries around the world. The associates have one or more of certifications like c-GMP, ISO-9001, ISO-14001, ISO-22000:2005, FSSC 22000; OHSAS 18001; Kosher and Halal Certified; HACCP, FSSAI and FDA - GMP approval. Buyers are assured of good quality and CIF wholesale and retail price for supplies of our Acetic Acid. |
--------- 
Cupric Chloride or Copper Chloride Pure & USP Manufacturers Suppliers
Copper Chloride
Cupric Chloride USP
Cupric Chloride or Copper Chloride Anhydrous CAS No.: 7447-39-4, Molecular Weight: 134.45, Chemical Formula: CuCl2
Cupric Chloride or Copper Chloride Dihydrate CAS No.: 10125-13-0, Molecular Weight: 170.48, Chemical Formula: CuCl2 -2H2O
| Parameters | Premium Grade |
| Assay as CuCl2 2H2O | ≥99% |
| Appearance | Green to Bluish-Green |
| Total Copper as Cu | ≥36.9% |
| Copper Nitrate as Cu(NO3)2 | ≤0.1% |
| Moisture | 3.0 % m/m max |
| Free HNO3 | 0.05 % m/m max |
| Iron as ‘Fe’ | ≤0.005% |
| pH 5% Solution | 3.0- 4.0 |
| Matter Insoluble in H2O | ≤0.01% |
Specifications of Cupric Chloride Anhydrous or Copper Chloride Anhydrous:
| PARAMETERS | Standard Grade |
| Appearance | Fine Brownish Powder |
| Assay | 98.00 % to 99.8% |
| Copper | 46% to 46.4% |
| Cuprous Chloride | 0.05 % (max) |
| Free Moisture | 1.00 % (max) |
| Water Insoluble | 0.10 % (max) |
| Iron | 0.10 % (max) |
| Sulphate | 0.06 % (max) |
| Lead | 10 PPM (max) |
| Arsenic | 10 PPM (max) |
| Zinc | 20 PPM (max) |
| Nickel | 20 PPM (max) |
Cupric Chloride USP Specifications
CuCl2-2H2O -- 170.48
Copper chloride (CuCl2) dihydrate.
Copper(2+) chloride dihydrate [CAS 10125-13-0].
Anhydrous 134.45 [CAS 7447-39-4].
Cupric Chloride contains not less than 99.0 percent and not more than 100.5 percent of CuCl2, calculated on the dried basis.
Identification: A solution (1 in 20) responds to the tests for Chloride and for Copper.
Loss on drying: Dry it at 105 for 16 hours: it loses between 20.9% and 21.4% of its weight.
Insoluble matter: Transfer 10 g to a 250-mL beaker, add 100 mL of water and 2 mL of hydrochloric acid, cover the beaker, and heat to boiling. Digest the hot solution on a steam bath for 1 hour, and filter through a tared, fine-porosity filtering crucible. Rinse the beaker with hot water, passing the rinsings through the filter, and finally wash the filter with additional hot water. Dry the filter at 105C, the residue weighs not more than 1.0 mg (0.01%).
Sulfate: (0.005%).
Limit of sodium: The limit is 0.02%.
Limit of potassium: The limit is 0.01%.
Limit of calcium: The limit is 0.005%.
Limit of iron: The limit is 0.005%.
Limit of nickel: The limit is 0.01%.
Organic volatile impurities: meets the requirements.
Cupric Chloride Dihydrate ACS AR Analytical reagent Grade
Copper (II) Chloride Dihydrate
CuCl2 . 2H2O
Formula Wt 170.48
CAS Number 10125-13-0
| Assay | ≥99.0% CuCl2 . 2H2O |
MAXIMUM ALLOWABLE
| Insoluble matter | 0.01% |
| Nitrate (NO3) | 0.015% |
| Sulfate (SO4) | 0.005% |
| Calcium (Ca) | 0.005% |
| Iron (Fe) | 0.005% |
| Nickel (Ni) | 0.01% |
| Potassium (K) | 0.01% |
| Sodium (Na) | 0.02% |
Cupric Chloride or Copper Chloride Manufacturers Suppliers:
Foodoric Group of Cos
India, USA, UAE, Europe
e-mail: info@foodoric.com
Copyright Last 12 June, 2025
Cupric Chloride or Copper Chloride Suppliers, Exporters, Importers, Manufacturers offering good CIF wholesale and retail prices, quality and online information.
A jackal woke up early in the morning and went in to the plains. He looked at his long shadow in the rising morning sun and said to himself, "I must have a camel for my meal today".
He kept moving around till noon and it was getting hot and the jackal was tired. He was also hungry and thirsty. He looked at his small shadow in the mid-day sun. He murmered, "I was only joking about the camel, a mouse will do".